您了解對變速箱進行“維修”或“再制造”的優(yōu)勢嗎？實際上很多車主對此沒有什么了解，為了更好的進行維修以及避免問題不能及時處理，下面就能讓濟南自動變速箱維修廠家給您講講吧。

Do you know the advantages of "repairing" or "remanufacturing" the transmission? In fact, many car owners don't know much about this. In order to better repair and avoid problems that can't be solved in time, let the Jinan automatic transmission maintenance manufacturer tell you about it.

用戶車輛變速箱出現(xiàn)故障后，由維修站自行解決問題;這是我們通常所說的“維修”;這種方法可以就地解決，但質量得不到保障，如果由于質量再次出現(xiàn)問題，會造成時間上更大的浪費，甚至有時需要更換的零件不能及時到位，造成客戶非常不滿意，這必然會造成對汽車品牌和維修站聲譽的嚴重影響;

If the gearbox of the user's vehicle fails, the maintenance station shall solve the problem by itself; This is what we usually call "maintenance"; This method can be solved on the spot, but the quality can not be guaranteed. If the quality problem occurs again, it will cause a greater waste of time. Sometimes the parts that need to be replaced can not be in place in time, causing customers to be very dissatisfied, which will inevitably have a serious impact on the reputation of the car brand and maintenance station;

由變速箱廠對故障變速箱進行“維修”或稱“再制造”。根據客戶要求，當變速箱有故障時，客戶可選擇將變速箱運到廠，維修后再寄回，也可以選擇直接換一個由廠“再制造”的變速箱總成。這個方案在質量和價格上都有保證。

The gearbox factory shall "repair" or "remanufacture" the faulty gearbox. According to the customer's requirements, when the gearbox has faults, the customer can choose to transport the gearbox to the factory and send it back after maintenance, or directly replace it with a factory "remanufactured" gearbox assembly. The quality and price of this scheme are guaranteed.

A、自動變速箱維修需要大量的設備。自動變速箱由于其結構緊湊，配合精密，技術含量高，所以必須依靠專門設備才能對其內部零件進行修復，例如變扭器等部件，另外在每個操作工序也要依賴儀器進行準確的檢測，這些儀器設備并不是普通維修站所配備的;

A. Automatic transmission maintenance requires a lot of equipment. Because of its compact structure, precise matching and high technical content, the automatic transmission can only be repaired by special equipment, such as torque converter and other components. In addition, in each operation process, it also needs to rely on instruments for accurate detection. These instruments and equipment are not equipped by ordinary maintenance stations;

B、需要有經驗的高素質人才。由于自動變速箱技術新異，普通修理技工難以掌握，而且接觸機會也很少。而廠配備了這方面高要求的人才，也有很好的學習和培訓機會，對此專項工作能很快積累經驗，保證維修和制造質量;

B. Experienced and high-quality talents are required. Due to the new technology of automatic transmission, it is difficult for ordinary repair technicians to master it, and there are few opportunities to contact it. The factory is equipped with talents with high requirements in this field, and also has good learning and training opportunities. It can quickly accumulate experience in this special work to ensure the quality of maintenance and manufacturing;

此外由于每個變速箱故障原因不同，損壞部件也不同，由廠進行整理歸類，可以充分利用變速箱上有用的零部件，節(jié)約資源。您對此有怎樣的想法可以來我們網站http://m.avjj89.com留言分享！

In addition, due to the different causes of each gearbox failure, the damaged parts are also different, which can be sorted out by the factory to make full use of the useful parts on the gearbox and save resources. How do you think about this? Please come to our website http://m.avjj89.com Message sharing!